저널

Recent applications of lubricant-impregnated nanoporous surface : A Review
윤활액이 담지된 나노다공성 표면의 최신 응용분야

한경완, 배기창,이정훈*
[Kyeongwan Han, Kichang Bae, Junghoon Lee *]

부경대학교 금속공학과
Department of Metallurgical Engineering, Pukyong National University, Busan 48513, Republic of Korea

한국표면공학회지, Vol. 56, No. 1, pp. 1-11.

DOI : https://doi.org/10.5695/JSSE.2023.56.1.1

Three-dimensional porous films consisting of copper@cobalt oxide coreshell dendrites for high-capacity lithium secondary batteries
리튬이차전지용 고용량 음극을 위한 구리@코발트산화물 코어-쉘 수지상 기반 3차원 다공성 박막

주소영a, 최윤주a,b, 최우성a,*, 신헌철a,*
[So-Young Jooa, Yunju Choia,b, Woo-Sung Choia,* and Heon-Cheol Shina,*]

a부산대학교 재료공학과, b한국기초과학지원원구원 부산센터
aSchool of Materials Science and Engineering, Pusan National University, Busan 46241, Republic of Korea bKorea Basic Science Institute, Busan Center, Busan 46742, Republic of Korea

한국표면공학회지, Vol. 56, No. 1, pp. 104-114.

DOI : https://doi.org/10.5695/JSSE.2023.56.1.104

Challenges for the realization of carbon neutrality and air pollution improvement in major Northeast Asian countries: The importance of transitioning to eco-friendly EV industry and the necessity of developing lightweight materials

[Sung-Hyung Leea,b,c*, Hitoshi Yashirob, Song-Zhu Kure-Chud]

aGakkō hōjin Kitahara gakuen, Hirakawa 036-0146 Japan bDepartment of Chemistry and Biological Science, Iwate University, Morioka, Iwate 020-8551 Japan cKorea Wayokai Institute of Technology, Seoul 152-880 Korea dMaterials Function and Design, Nagoya Institute of Technology, Nagoya, Aichi 466-855 Japan

한국표면공학회지, Vol. 56, No. 1, pp. 12-39.

DOI : https://doi.org/10.5695/JSSE.2023.56.1.12

Copper phthalocyanine conjugated PANI coated screen printed carbon electrode for electrochemical sensing of 4-NP

[Ramalingam Manikandana, Jang-Hee Yoonb* Seung-Cheol Changa*]

aDepartment of Cogno-Mechatronics Engineering, College of Nanoscience and Nanotechnology, Pusan National University, Busan 46241, Republic of Korea. bBusan center, Korea Basic Science Institute, Busan 46742, Republic of Korea

한국표면공학회지, Vol. 56, No. 1, pp. 40-54.

DOI : https://doi.org/10.5695/JSSE.2023.56.1.40

Investigation of direct growth behavior of carbon nanotubes on alumina powders to use as heat dissipation materials
방열소재 응용을 위한 알루미나 분말 표면 위 탄소나노튜브의 직접 성장 거동 고찰

이종환, 한현호, 정구환*
[Jong-Hwan Lee, Hyun-Ho Han and Goo-Hwan Jeong*]

강원대학교 대학원 신소재공학과
Department of Advanced Materials Science and Engineering, Graduate School of Kangwon National University, Chuncheon 24341, Republic of Korea

한국표면공학회지, Vol. 56, No. 1, pp. 55-61.

DOI : https://doi.org/10.5695/JSSE.2023.56.1.55

Effective problem mitigation strategy of lithium secondary battery silicon anode utilized liquid precursor
에틸벤젠을 이용한 실리콘 산화물 음극재의 효과적인 카본 코팅 전략

이상렬, 박성수, 채수종*
[Sangryeol Lee, Seongsu Park, Sujong Chae*]

부경대학교 공업화학전공
Department of Industrial Chemistry, Pukyong National University, Busan 48547, Republic of Korea

한국표면공학회지, Vol. 56, No. 1, pp. 62-68.

DOI : https://doi.org/10.5695/JSSE.2023.56.1.62

Effects of hairline treatment on surface blackening and thermal diffusion of Zn-Al-Mg alloy-coated steel sheet
Zn-Al-Mg 합금도금강판의 헤어라인 처리가 표면흑색화 및 열확산도에 미치는 영향

박진성a, 윤덕빈a, 김상헌b, 김태엽c, 김성진a,*
[Jin Sung Parka, Duck Bin Yuna, Sang Heon Kimb, Tae Yeob Kimc, Sung Jin Kima,*]

a순천대학교, b(주) MEC, c한국해양대학교 기관시스템공학부
aDepartment of Advanced Materials Engineering, Sunchon National University, Sunchoen 57922, Republic of Korea bM.E.C. Co. LTD. Technical Research Laboratories, Singeumsandan 5-gil, Gwangyang 57714, Republic of Korea cDivision of Marine System Engineering, Korea Maritime & Ocean University, Taejong-ro, Busan 49112, Republic of Korea

한국표면공학회지, Vol. 56, No. 1, pp. 69-76.

DOI : https://doi.org/10.5695/JSSE.2023.56.1.69

Electrolytic silane deposition to improve the interfacial adhesion Ag and epoxy substrate
Ag/에폭시간 계면 접착력 향상을 위한 전해 실란 처리

공원효a,b, 박광렬c, 류호준c, 배인섭c, 강성일c, 최승회a,*
[Wonhyo Konga,b, Gwangryeol Parkc, Hojun Ryuc, Sung-il Kangc, Inseob Baec, Seunghoe Choea,*]

a한국재료연구원, b부산대학교 재료공학과, c해성DS 주식회사
aSurface & Nano Materials Division, Korea Institute of Materials Science (KIMS), 797 Changwondaero, Seongsan-gu, Changwon, Gyeongsangnam-do, 51508, Republic of Korea bDepartment of Materials Science and Engineering, Pusan National University, Busan, 46241, Republic of Korea cHaesung DS, 726, Ungnam-ro, Seongsan-gu, Changwon, Gyeongsangnam-do, 51552, Republic of Korea

한국표면공학회지, Vol. 56, No. 1, pp. 77-83.

DOI : https://doi.org/10.5695/JSSE.2023.56.1.77

An analysis of neutron sources and gamma-ray in spent fuels using SCALE-ORIGEN-ARP
SCALE-ORIGEN-ARP를 이용한 사용후핵연료 내 중성자 및 감마선원 분석

차소희, 박광헌*
[So-Hee Cha, Kwang-Heon Park*]

경희대학교 원자력공학과
Department of Nuclear Engineering, Kyung Hee University, Kyunggi-do, 446-701, Korea

한국표면공학회지, Vol. 56, No. 1, pp. 84-93.

DOI : https://doi.org/10.5695/JSSE.2023.56.1.84

Effect of process pressure and nitrogen addition ratio on the uniformity of hardening depth and surface properties of Cr-Mo low alloy steel in vacuum carburizing
Cr-Mo 저합금강의 진공침탄 공정 압력 및 질소 첨가 비율에 따른 경화깊이 균일도 및 표면 특성 효과

권기훈a,b, 박현준a, 안기원a, 이영국b, 문경일a,*
[Gi-hoon Kwona,b, Hyunjun Parka, Young-Kook Leeb, Kyoungil Moona*]

a한국생산기술연구원 친환경열표면처리연구부문, b연세대학교 신소재공학과
aHeat & Surface Technology R&D Group, Korea Institute of Industrial Technology, Siheung, 15014,Korea bDepartment of Materials Science and Engineering, Yonsei University, Korea

한국표면공학회지, Vol. 56, No. 1, pp. 94-103.

DOI : https://doi.org/10.5695/JSSE.2023.56.1.94