Korean Institute of Surface Engineering

pISSN : 1225-8024 | eISSN : 3399-8403


공학

한국표면공학회지 (24권4호 206-214)

Electroless Nickel-Boron Plating on p-type Si Wafer by DMAB

DMAB에 의한 P형 실리콘 기판 무전해 니켈-붕소 도금

김영기;박종환;이원해;

한양대학교 공과대학 금속공학과;

Abstract

In the basic study of selective electroless Ni plating of Si wafers, plating rate and physical properties are investigated to obtain optimum conditions of contact hole filling. Si wafers are excellently activated in the concentration of 0.5M IF, 1mM PdCl2, 2mM EDTA at $70^{circ}C$, 90sec. The optimum condition of Ni-B deposition on p-type Si wafers is 0.1M NiSO4, 0.11M Citrate, $70^{circ}C$, pH6.8, 8mM DMAB. The main factor in the sheet resistences variation of films is amorphous and on heat treating matrix was transformed into a stable phase (Ni+Ni3B) at $300-400^{circ}C$. But pH or DMAB concentration in the plating solution doesn`t play role of heat-affected phase change.

Keywords