Korean Institute of Surface Engineering

pISSN : 1225-8024 | eISSN : 3399-8403


공학

한국표면공학회지 (47권4호 181-185)

Characteristics of IGZO Films Formed by Room Temperature with Thermal Annealing Temperature

상온에서 증착된 IGZO 박막의 열처리 온도에 따른 특성

이석열;이경택;김재열;양명수;강인병;이호성;
Lee, Seok-Ryeol;Lee, Kyong-Taik;Kim, Jae-Yeal;Yang, Myoung-Su;Kang, In-Byeong;Lee, Ho-Seong;

LG Display 연구소;경북대학교 신소재공학부;
LG Display Laboratory;School of Materials Science and Engineering, Kyungpook National University;

DOI : 10.5695/JKISE.2014.47.4.181

Abstract

We investigated the structural, electrical and optical characteristics of IGZO thin films deposited by a room-temperature RF reactive magnetron sputtering. The thin films deposited were annealed for 2 hours at various temperatures of 300, 400, 500 and $600^{circ}C$ and analyzed by using X-ray diffractometer, transmission electron microscopy, atomic force microscope and Hall effects measurement system. The films annealed at $600^{circ}C$ were found to be crystallized and their surface roughness was decreased from 0.73 nm to 0.67 nm. According to XPS measurements, concentration of oxygen vacancies were decreased at $600^{circ}C$. Optical band gap were increased to 3.31eV. The carrier concentration and Hall mobility were sharply increased at 600oC. Our results indicate that the IGZO films deposited at a room temperature can show better thin film properties through a heat treatment.

Keywords

IGZO film;R.F. magnetron sputtering;annealing;