Deposition of $(Ti,Cr)N-MoS_2$ Thin Films by D.C Magnetron Sputtering
Kim S.K.;Kim J.H.;
School of Materials Science and Engineering, University of Ulsan;
As technology advances, there is a demand for development of hard, solid lubricant coating. (Ti,Cr)N-$MoS_2$, films were deposited on SKD 11 tool steel substrate by co-deposition of $MoS_2$, with (Ti,Cr)N using a D.C. magnetron sputtering process. The influence of the $N_2/Ar$ gas ratio, the deposition temperature, the amount of $MoS_2$ in the films, and the bias voltage on the mechanical and the structural properties of the films were investigated. Wear tests were performed on the films deposited in various conditions.
PDF